Fuel Cell
You may be sure that Coatema will also offer you the optimal coating technology for the production of fuel cells. Our 10 years´ experience in the fuel cell market and the close cooperation with research institutes worldwide make us the competent partner, from the development up to the serial production.
On our plants, you can impregnate gas diffusion layers and apply the micro-porous layer and the platinum catalyst onto the gas diffusion layers. The GDL can consist of paper, non-wovens or fabrics. Systems for the membrane casting and the direct coating of membranes with platinum catalysts are also available.
The application systems that can be used for this purpose are: Knife System, Engraved Roller System, Slot Die System and Micro Roller System. They are available as modular coating heads that can be quickly changed and thus guarantee a high degree of flexibility.
The right plant in the scale-up process
Coatema offers plants for the basic research, lab coating and pilot plants up to production plants for MEA´s or other fuel cell components. These solutions are available for the following fuel cell technologies:
AFC, PEMFC/HTPEMFC/DMFC, MCFC, SOFC
For these different fuel cell technologies, Coatema offers plants with working widths from DIN A 4 size up to material widths of 1.200 mm for roll to roll applications.
Click&Coat™ - Concept
Coatema has developed the innovative Click&Coat™ concept for pilot plants to be able to react faster and in a more cost-saving way to the most different requirements. Click&Coat™ permits the flexibility of the individual coating heads but also of the entire plant: The individual plant components are movable and can be brought into the right position by a simple "click" and be connected to the recently developed control system. This is a unique way to combine different processes in modular design.
(Source of the pictures: Forschungszentrum Jülich)
On our plants, you can impregnate gas diffusion layers and apply the micro-porous layer and the platinum catalyst onto the gas diffusion layers. The GDL can consist of paper, non-wovens or fabrics. Systems for the membrane casting and the direct coating of membranes with platinum catalysts are also available.
The application systems that can be used for this purpose are: Knife System, Engraved Roller System, Slot Die System and Micro Roller System. They are available as modular coating heads that can be quickly changed and thus guarantee a high degree of flexibility.
The right plant in the scale-up process
Coatema offers plants for the basic research, lab coating and pilot plants up to production plants for MEA´s or other fuel cell components. These solutions are available for the following fuel cell technologies:
AFC, PEMFC/HTPEMFC/DMFC, MCFC, SOFC
For these different fuel cell technologies, Coatema offers plants with working widths from DIN A 4 size up to material widths of 1.200 mm for roll to roll applications.
Click&Coat™ - Concept
Coatema has developed the innovative Click&Coat™ concept for pilot plants to be able to react faster and in a more cost-saving way to the most different requirements. Click&Coat™ permits the flexibility of the individual coating heads but also of the entire plant: The individual plant components are movable and can be brought into the right position by a simple "click" and be connected to the recently developed control system. This is a unique way to combine different processes in modular design.
(Source of the pictures: Forschungszentrum Jülich)
