Informative article on the technical analysis of Coatema's pilot plants

2024 Coatema Articel Pro Flexconvert

 

Pilot coaters as part of the ‘lab2fab’ vision

Coating and printing technologies in new emerging markets like batteries, fuel cells, electrolysers, solar and printed electronics are advancing rapidly, and Coatema is at the forefront of providing specialised and standardised solutions for pilot equipment that meet both research and production requirements. As a leading German supplier, Coatema offers a comprehensive range of pilot systems designed specifically for the coating and printing industries.

This article will provide an in-depth technical analysis of their pilot equipment, focusing on the versatility and advanced features that support both manufacturing and research applications.

Read more ...

Ohio State partners with international manufacturer as new Battery Center renovations set to begin

2024 IMR Coatema at Ohio State 6 862x575

Columbus / Dormagen, July 29th, 2024

 

A leading international equipment manufacturer has partnered with The Ohio State University's new Battery Cell Research and Demonstration Center, paving the way for new advancements in battery cell manufacturing needed in the electric vehicle (EV) industry, as well as expanding access to cutting-edge equipment, education and workforce training in the United States.

 

IMMR Horiz RGBHEX


 
Germany-based partner Coatema Coating Machinery GmbH and their U.S. distributor next Machinery Group, Inc. will sponsor the acquisition of a cutting-edge equipment line for battery cell coating, which will enable users to experiment with different materials, processes and configurations at varying scales of production.
 
Ohio State is set to open the new $22 million, 22,000-square-foot battery center in June 2025. Managed by the Institute for Materials and Manufacturing Research (IMR), the center will accelerate domestic production of battery cell materials and manufacturing technologies, while also serving as a hands-on training hub for workforce development in advanced battery technology.

Read more ...

“That would trigger an enormous innovation boost”

2024 Coatema C2 Titel Magazin

Very nice interview in C2 Germany with Thomas Kolbusch about the advantages of corporate cooperation, fruitful partnerships and how to promote cooperation with start-ups. Read the interview with Thomas Kolbusch, Director Sales/Marketing/Technology and Vice President at Coatema.


Read the full articel as PDF here (in German)


What advantages do corporate partnerships offer? What turns special-purpose relationships into fruitful partnerships? And how does collaboration with start-ups work? Thomas Kolbusch, Director Sales/Marketing/Technology and Vice President at Coatema, answers these questions.

 

Read more ...

Visit by Hermann Gröhe to Coatema

2024 Coatema Besuch Groehe03

Dr. Valentino Villari, Gabriel Brooch, Thomas Kolbusch, Hermann Gröhe und Bertram Hartmann (from left to right)

 

Dormagen, April 30th, 2024

Coatema Coating Machinery GmbH in Dormagen had an important political visit last week: Hermann Gröhe, member of the German Bundestag and deputy chairman of the CDU/CSU parliamentary group, and Heike Troles, member of the state parliament, were guests. Managing Director Bertram Hartmann and authorized signatories Thomas Kolbusch and Dr. Valentino Villari gave the political guests a tour of the company, providing them with insights into innovative processes and technologies.

The agenda included topics such as green hydrogen, batteries and solar systems. These are areas in which Coatema, as a manufacturer of coating systems, occupies a leading position in numerous production processes in the industry. Coatema also presented its successful participation in EU research projects, including the innovative Flex2Energy project, in which a new production plant for the flexible solar cell sector is being built in Greece. The company's industry-leading expertise and innovative strength, as well as its commitment to sustainability and the development of skilled workers, gave the politicians a comprehensive insight into current projects and challenges.  The discussion focused on the importance of sustainable and future-oriented production, especially in light of the current economic situation in Germany and worldwide. In particular, the issue of the shortage of skilled workers in the region was also discussed.

 

Read more ...

Pioneering the Future of Advanced Coating and Printing Solutions

2024 Coatema Artikel in PRO Flexconvert

Coatema offers lab and pilot machinery product lines for deep tech markets like batteries, solar, prepregs, medical, fuel cells, green hydrogen, and printed electronics. The upscaling of these technologies from lab2fab is the company vision.

At the forefront of technological innovation, Coatema Coating Machinery GmbH proudly leads the industry in providing cutting-edge coating and printing solutions for a variety of high-tech sectors such as batteries, solar energy, prepregs, medical devices, fuel cells, green hydrogen, and printed electronics. What truly distinguishes Coatema is our specialization in developing both Sheet-to-Sheet and Roll-to-Roll equipment.

Our mission goes beyond merely supplying equipment, we are dedicated to revolutionizing the translation of laboratory breakthroughs (lab2fab) into scalable, real-world applications. This commitment ensures that our clients maintain a competitive edge in their respective markets. Our expertise is showcased by our expansive Research and De-velopment center, the largest in Europe, which hosts over 10 pilot lines. With a focused team engaged in more than 12 publicly funded projects, we not only offer equipment but also provide comprehensive services for both process optimization and product development. This integrated approach guarantees that our clients receive unrivaled support at every stage of their journey. Choose Coatema as your partner for a future where innovation converges with practi-cality and aspirations evolve into tangible accomplishments.

Read more ...

Das Potenzial von Elektroden

2024 WaterProof

Das Potenzial von Elektroden
Interview mit Dr. Pegah Shakeri

Dr. Pegah Shakeri, Beschichtungsspezialistin bei Coatema, gab kürzlich Einblicke in das europäische Projekt WaterProof zur Förderung der elektrochemischen CO2-Umwandlung. Coatema unterstützt diese Arbeit mit der Click&Coat™-Technologie, einem wichtigen Baustein für die Hochskalierung der Produktion von Gasdiffusionselektroden für sauberere Wasserkreisläufe.

Coatema ist mit seiner Click&Coat™-Technologie führend und fördert die schnelle Skalierung von Spezialbeschichtungen für das Projekt WaterProof-Elektroden. Dank der Modularität und Flexibilität der Click&Coat-Anlage gelingt es dem Projekt WaterProof, den elektrochemischen Umwandlungsprozess zu verbessern und sowohl die Effizienz als auch die Umweltverträglichkeit zu steigern.

Hier finden Sie das gesamte Interview

24 04 10 WATERPRROOF Interview Shakeri Coatema

Read more ...

IDEEL project: Industry-relevant scaling of laser drying processes for lithium-ion batteries is within reach

2024 IDEEL Trocknungsmodul mit 2 Laserspots 1800pxbreit

Innovative process technology enables energy-efficient drying of anodes and cathodes while at the same time reducing space requirements

As part of the IDEEL research project (Implementation of Laser Drying Processes for Economical & Ecological Lithium-Ion Battery Production), project partners from industry and research are developing a laser drying process for the more climate-friendly and economical serial production of lithium-ion batteries. Now, for the first time, the process has been successfully scaled up to a coating and drying speed of 5 m/min in a continuous process, proving that industrial implementation is technically possible and economically viable.

 

Mülheim-Kärlich, 09.04.2024 As part of the IDEEL research project, Fraunhofer ILT has succeeded for the first time this year in scaling up the laser drying process in an R2R (roll-to-roll) system from Coatema GmbH to a web speed of 5 m/min and demonstrating 2-stage laser drying. This doubling of the web speed (compared to the previous year) was made possible using laser beam sources and drying optics specially developed for the requirements of laser drying by Laserline. High-precision thermal cameras from Optris in combination with a laser power control system specially developed for this process ensure homogeneous drying. In combination with the short response time of the laser beam sources applied, this control concept enables highly dynamic process control. Furthermore, the thermographic images also enable reliable detection of defects in the electrodes - such as variations in layer thickness or unwanted particles in the layers.

Read more ...

The Partnership – Coatema and Heliosonic are planning a partnership

Heliosonic print head02

Heliosonic laser induced force transfer

 

Dormagen/Rüsselsheim am Main, March 6th, 2024

 

Our joint booth with our Partner HELIOSONIC promises to be the highlight of the event this year. Stay tuned for the launch of fuelcell2print, our high precision digital membrane coating system integrated into a world-class web handling infrastructure. Pre-registration for trial days coming soon! 

Key highlights with our partner include a seamless integration of HELIOSONIC print head with Coatema's cutting-edge web handling systems, digital fabrication for renewable energy tech, and a significant leap in printing capabilities, combining speed with unparalleled precision. 

The fusion of Coatema's legacy with HELIOSONIC's innovations isn't just a partnership; it's a call to the future of industrial printing. We invite stakeholders, partners, and customers to join us in embracing this new era where potential meets realization. 

Read more ...

Articel about Dr. Pegah Shakeri

11.12.2023  | VDMA-Magazin Dezember 2023

After completing her master's degree in Iran, Pegah Shakeri came to Germany to pursue a doctorate in physics and completed her studies at the Max Planck Institute for Dynamics and Self-Organization in 2022.

2023 11 12 Ein Tag mit Coatema Shakeri

Read the entire article from the VDMA December 2023 issue:

Articel as PDF

https://www.vdma.org/vdma-magazin

Read more ...

ROCKET Projekt

 

2023 Rocket01

Beginning of May, we were once again able to present the innovation-promoting effect of European cross-border cooperation in the course of Europe Month at the NRW Ministry of Economics.

The focus was on various results of the Interreg Germany-Netherlands projects ROCKET and ROCKETReloaded, which have meanwhile been transferred into real applications and products and which illustrate various markets of the addressed technologies. These include, for example, a novel hydrogen sensor, production processes for nanoparticles and flexible electronics, through to the forming of solid metal sheets.

Read more ...

Retrofittable electrochromic films for windows and glass facades control light incidence

04 2023 03 800pxbreit

Adjusting light transmission as required: electrochromic film in the dark (left) and light state (right)
© Fraunhofer ISC

 

Controlling light and heat radiation through windows and glass facades at the push of a button, saving energy and still maintaining a clear view? Switchable electrochromic films that turn dark but remain transparent are expected to make this possible in the future.

The fact that this can also be retrofitted in existing buildings is to be demonstrated by the joint project "EnOB: FLEX-G 4.0 - Technologies for innovative switchable films as a retrofit solution for energy-saving windows and glass facades" (funding reference: 03EN1048), which is funded by the German Federal Ministry of Economic Affairs and Climate Action BMWK.
Coordinated by the Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP, the project will work with six other partners to advance the state of the art to the prototype stage over the next four years. In doing so, the project aims to kill two birds with one stone - on the one hand, the windows of a Dresden school are to be retrofitted, and on the other, the pupils are to be actively involved in the technology development as a contribution to promoting career orientation.

Read more ...

New brochure from NRW.Europe with article about Coatema

You can find a very nice articel about Coatema in there new brochure: From Sustainability to Resilience – NRW.Europa – The new brochure with practical examples from our customers is now available!

NRWEurope Artikel Coatema en

Links:
NRWEuropa_Erfolgsgeschichten_Client_Journeys_2022_2023 (Deutsche Ausgabe)
NRWEuropa_SuccessStories_Client_Journeys_2022-2023 (English Version)

EEN NRW / NRW.Europa

IDEEL Project: Manufacture of laser-dried anodes and LFP cathodes achieved first time in a roll-to-roll process

The IDEEL research project aims to introduce a laser drying process as a more climate-friendly and economical method for the volume production of lithiumion batteries.

2023 Fraunhofer ILT pm hmi 2023 1 trocknungsanlage

Laser drying in a roll-to-roll process makes the series production of lithium-ion batteries significantly more sustainable and economical.
For this purpose, a highpower diode laser with zoom optics was integrated into a film coating system in the IDEEL research project.
© Fraunhofer ILT, Aachen, Germany.

 

Within this context, it has now been possible to produce laserdried anodes and LFP cathodes in a roll-to-roll process for the first time. The innovative manufacturing process significantly reduces energy consumption in electrode production and at the same time enables the drying speed to be doubled.

Read more ...

University meets Industry

Presseinformation  |  23. Dezember 2022

 

Studierende des Studiengangs Oberflächentechnologie/Neue Materialien reisen im Rahmen der VDMA-Initiative nach Dormagen

 

20221223 University goes Industry VDMA Initiative

 

Um im Bereich Batteriemaschinen- und Anlagenbau qualifizierten Nachwuchs zu gewinnen, rief der Verband Deutscher Maschinen- und Anlagenbauer die Aktion „University meets Industry“ aus. Beteiligt daran: Studierende aus dem Studiengang Oberflächentechnologie/Neue Materialien der Hochschule Aalen, die im Rahmen der Initiative Mitte November nach Dormagen reisten.

AALEN | Um den Arbeitsmarkt rund um „Batterieproduktionstechnik“ sichtbarer zu machen und qualifizierten Nachwuchs zu gewinnen, vermittelt der Verband Deutscher Maschinen- und Anlagenbauer (VDMA) Kontakte zwischen Mentor:innen aus der Branche zu Studierenden aus relevanten Studiengängen. Auf Initiative von Prof. Dr. Timo Sörgel und Prof. Dr. Volker Knoblauch, beide passionierte Forscher im Bereich der Batterie(zell)technologien an der Hochschule Aalen, nahmen mehrere Studierende des Aalener Studiengangs Oberflächentechnologie/Neue Materialien an der Aktion teil.

Read more ...

Interessanter Artikel über den „Mehrwert durch Digitalisierung”

05.12.2022  | C2 Coating & Converting Fachartikel

C2 Ausgabe96 Dez22

In Zusammenarbeit mit Jürgen Kreis von unserem OEM-Partner ARENDAR und Thomas Kolbusch (Coatema Coating Machinery GmbH) entstand der Artikel in der C2 Coating & Converting.

Thomas Kolbusch und Jürgen Kreis erläutern anschaulich, wie ein Maschinenbauer durch die Integration des ARENDAR eine ganzheitliche Digitalisierungslösung nicht nur für Neukunden sondern auch für Bestandsanlagen (Retrofit) anbieten kann und somit seine Kunden ermöglicht durch die Schaffung eines Digitaltwin seiner Produktion den Mehrwert echter Industry 4.0 erlebbar und Digitalisierung praktisch anwendbar machen kann.


Lesen Sie mehr dazu in der aktuellen Ausgabe des C2 – Coating & Converting Magazins ab S. 28ff.

Artikel als PDF

oder online:
https://www.coating-converting.de/epaper/c2de/284/epaper/8739/index.html

 

 

Signing of Memorandum of Understanding (MOU) between Organic Electronic Technologies P.C and Coatema Coating Machinery GmbH

oet agrivoltaics res edit 800pxbreit

Organic Electronic Technologies and Coatema agreed to form a cooperation by signing a memorandum of understanding, addressing the goal of supplying the market with hi-tech, turn-key solutions through the development and manufacturing of Industrial Scale Automated Roll-to-Roll (R2R) Manufacturing Lines for Organic Photovoltaics (OPVs). The MOU signing took place at Coatema Head Offices, Dormagen North Rhine-Westphalia, Germany, on November 17th 2022.

This MOU was signed by the CEO of Organic Electronic Technologies Chrysostomos Varlamis, and Managing Directors of Coatema Markus Waterkamp and Bertram Hartmann. This MOU is a formal mutual commitment of both entities to cooperate and provide technological excellence and superior know-how in their respective fields, in an effort to provide unique solutions for the Industrial Manufacturing of Organic Photovoltaics, in Giga Fab format.

Read more ...

Great response at the 21st international Coating Symposium

The response to our Symposium 2022 was really great. This year's symposium was very comprehensive and informative. Fascinating presentations on technologies for good coating results.

Check out the best of Symposium 2022. Two successful days with excellent speakers and a great audience. See you again next November with new and exciting topics.


Read more ...

EU project FlexFunction2Sustain

22.6.2022 Press Release

Sustainable and Smart becomes real – World´s first organic photovoltaic cell on recycled material made by EU-consortium FlexFunction2Sustain.

FF2S colorw400

EU flag 120x80

The partners of the EU project FlexFunction2Sustain have committed themselves to create a network for innovative solutions for sustainable and smart products powered by nano-functionalized paper and plastic in order to support SMEs, start-ups and industries in the development and market launch of pioneering products. After the first two years, a number of promising results and prototypes have emerged and will be presented at the Conference for Industrial Technologies IndTech 2022 in Grenoble, France, June 27-29, 2022. Among them, a recently finalized highlight: the first working organic photovoltaic cell on recycled plastics.

Bild FlexFunction2Sustain

Read more ...

ATH Group focuses strategic direction on converting industry and sells ZAE-Antriebssysteme

Hamburg, January 18, 2022

Hamburg-based ATH Altonaer-Technologie-Holding GmbH announces that it has sold ZAE-Antriebssysteme GmbH & Co KG as of December 31, 2021. The buyer is Dacapo Group, based in Berlin.

„In the future, we will focus on the coating and converting industry in order to expand our position in this area in a targeted manner and to further develop our portfolio,” explains Dr. Tarik Vardag, Managing Director of ATH.

Founded in 1919 from the gear department of Max Kroenert Maschinenfabrik, also a subsidiary of ATH, ZAE is a specialist for drive solutions and has an extensive range of standard and special gear units. „The sale of this traditional company with a shared history of more than 100 years was not easy for us, but it is a consistent step and provides an opportunity for all companies to focus on their respective core businesses,” Vardag continued.

The holding company is now focusing on the converting industry with its three operating companies - KROENERT, COATEMA and DRYTEC. This enables ATH to secure its existing technological lead in current and future-oriented end markets and to position itself for the future.

Read more ...

Coatema and SALD announce partnership on industrial Atomic Layer Deposition at CES 2022

7.1.2022 Dormagen / Eindhoven (ots)

Die Technologieschmiede SALD BV und der Maschinenbauer Coatema wollen die Technologie „Spatial Atomic Layer Deposition” (SALD) in die Massenproduktion bringen.

The tech-startup SALD BV and the mechanical and plant engineering company Coatema Coating Machinery GmbH announced a far-reaching development partnership at the CES 2022 innovation fair in Las Vegas last week. The common goal is to use the „Spatial Atomic Layer Deposition" (SALD) technology for industrial volume roll-to-roll production plants. In an R-2-R process („roll-to-roll”), a flexible base material is unrolled, a layer is coated or printed and the web is rolled up again, like the printing process of a newspaper.
Combined with the proprietary SALD technology, it is now possible to make nano-thin coatings with defined properties and functions in mass volume on the roll. Mass volume coating is essential for flexible electronic components, packaging films, and new solar and battery industry types.
In the first step, SALD BV and Coatema want to focus on battery technology, electrolysers and fuel cells. The new R2R process is particularly well suited for cost-effective mass production on a large scale.

 

Coatema logo k RGB152001 SALD Logo Oct 2021 RGB blue

Read more ...

Research Project: IDEEL

Presseinformation der Laserline GmbH | 24. November 2021

Laser drying of electrode coating in lithium-ion batteries: IDEEL research project aims to scale up the process to industrial production speeds for the very first time.

 

pr ideel coating nozzle 1 
© Studio Wiegel/Fraunhofer
The copper foil is continuously coated with an electrode slurry through a slot die.

 

Laser-based drying replaces convection dryers and thus supports more climate-friendly and economical production processes.

The IDEEL research project, supported by the German Federal Ministry of Education and Research (BMBF) as part of the Battery 2020 funding program, aims to launch a laser drying process for a more climate-friendly and economical series production of lithium-ion batteries.  The results will be incorporated into the Fraunhofer Research Fab Battery Cells (Forschungsfertigung Batteriezelle) in Münster, Germany, which will enable users from both industry and research to test and optimize the series production of new batteries.

Read more ...

Research production of the battery cell in Münster

An article about the Research Battery Cell of the Fraunhofer FFB, which was visited by the Federal Minister of Education and Research Karliczek, the Minister of Culture and Science (NRW) Pfeiffer-Poensgen and the Minister of Economy, Innovation, Digitalization and Energy (NRW) Prof. Dr. Pinkwart on November 19, 2021. The coating system at the FFB is from Coatema and we are pleased about the good cooperation with the FFB.

 mh6 1953 850px

https://www.wirtschaft.nrw/pressemitteilung/forschungsfertigung-batteriezelle-muenster-wird-schritt-fuer-schritt-ausgebaut

https://www.tagesschau.de/wirtschaft/technologie/batterieforschung-fraunhofer-muenster-101.html

Read the whole article as PDF here (Article in german language)

Successful 20th international Coating Symposium

Best of 20th international Coating Symposium.

This year we have proven that hybrid events cannot be less exciting. Some speakers onsite, online speakers, lots of participants and 3 live trials shown by our R&D team in our technical centre made it. Slot die coating, knife coating and rotary screen printing gave an overall insight in our latest technologies Thanks to all the speakers for the interesting talks on various topics regarding the latest developments in the market. We hope to see all visitors here again live next year when the series goes on with more interesting talks and trials.

 

For more information on this event please contact:
Marketing Manager Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

First R2R Net Workshop of the European Network for Roll-to-Roll-Surface Technologies in Dormagen, Germany

The launch of the R2R-Net and exchange with interested parties was at Coatema in Dormagen on September, 7th.
Coatema hosted the workshop hybrid and streamed live out of the Coatema TV studio.

We had a very successful day with 180 participants where the presenting partners of the R2R-Net gave comprehensive information on all aspects of R2R-Technologies in four technology cluster in the field of plasma technologies, physical vacuum-based technologies, flame treatment and wet coating.

Read more ...

OPTIMA packaging group expands portfolio to include fuel cell production lines – Market with great growth potential

In cooperation with Coatema Coating Machinery GmbH, Optima packaging group developed total solutions that include unwinding, coating, and cutting GDLs as well as combining the GDL and CCM to form the finished MEA. Stacking the finished MEAs into a fuel cell stack occurs in the final stages of development. This machine solution will also be market-ready by the end of the year.

 

3 Gas Diffusion Layer Assembly 1000px

Click here for the full press release (PDF)

 

For more information on this event please contact:
Marketing Manager Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Vacuum in research and practice – R2R technologies at work

Announcement of the launch and first R2R-Net workshop published in „Vakuum in Forschung und Praxis“. R2RNet is an effort intended to connect companies and institutions working in the field of R2R surface functionalization. Coatema is a partner of the R2R-Net community from the beginning and will host the first event in Dormagen, Germany. More information https://r2r-net.eu/

Coatema Artikel R2R

Here you can find the full article (PDF)

 

For more information on this event please contact:
Marketing Manager Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

20th international Coating Symposium

Coatema 2020 Symposium Teaser en03

20th international Coating Symposium 2021 at Coatema

The international Coating Symposium has been a fixed event in the coating and printing industry since the year 2000.

We are pleased to invite you to the 20th international Coating Symposium on September 8th, 2021.

Due to the current situation, the 20th international Coating Symposium is being converted to a virtual format. Detailed information and final agenda will follow until the middle of April. Speakers from industry, institutes and R&D will present the latest developments around Coating, Printing and Laminating and we will show trials in our R&D centre on site.

Please let us know if you are interested in attending this event by filling out the attached application form no later than September 1st, 2021.

We are looking forward to see you in September,
your Coatema Team

 

Einladung  Invitation

Anmeldung  Application form

Mehr Informationen

For more information on this event please contact:
Marketing Manager Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Coatema Webinar 2021, 15th June

Coatema 2021 Webinar15 06

 

Successful Webinar 1 and Coatema Webinar 2 today. Number one was for our visitors at the Hydrogen online and number two for the visitors of the #Coatema booth.

Follow us on LinkedIn and Twitter to get notice of the next webinars in September, October, November and December.

Thanks to the speaker Thomas Exlager and Fabian Kruska and our Q&A coordinator Kira Stephan. And the debeer team for the great organization.

 

Read more ...

TechBlick - digital event

Thomas Kolbusch, Vice President Coatema, spricht heute Abend über neue digitale Fertigungstechnologien für gedruckte Elektronik. Er wird einen Einblick geben, welche Auswirkungen die digitale Fertigung auf den PE-Markt und die Industrie in Europa haben könnte. Lot size one und der Einfluss von KI auf Produktionsprozesse in Kombination mit der Diskussion über die Umsetzung von Manufacturing 2.0 in Europa. Techblick ist die Erfolgsgeschichte im Bereich der virtuellen Konferenzen und wir freuen uns auf die nächsten Veranstaltungen. www.techblick.de

 

Image film for the RAL Quality Association

Image film for the Quality Association for medium-sized local governments

To demonstrate the versatility and quality of the RAL quality assurance and to draw attention to the Quality Association for medium-sized local authorities, an image video was shot in the summer of 2020 together with Branditstrategy and design GmbH from Cologne and the RAL German Institute for Quality Assurance and Labeling e.V.

Read more ...

Großer Preis des Mittelstandes

Coatema 2020 Statue GPdM

We are delighted to have been nominated for the 'Großer Preis des Mittelstandes' from the North Rhine-Westphalia region by the Oskar Patzelt Foundation.
„The 'Großer Preis des Mittelstandes' awarded by the Oskar Patzelt Foundation is the most coveted business award in Germany.“ (DIE WELT)
https://www.mittelstandspreis.com/

Publication from JOANNEUM RESEARCH

Lab on Chip Montage mit Artikel2

Nice publication from JOANNEUM RESEARCH and partners: „High-throughput roll-to-roll production of polymer biochips for multiplexed DNA detection in point-of-care diagnostics“ in the Lab on Chip Journal. This shows how roll-to-roll Nanoimprint lithography can bring down production cost of commercial point-of-care diagnostic systems.

Here you can find the full article (PDF)

https://pubs.rsc.org/en/content/articlelanding/2020/LC/D0LC00751J#!divAbstract

Pressemitteilung 19th international Coating Symposium

Dormagen, Germany – November 9th, 2020

The 19th International Coating Symposium on November 4th was successfully held in virtual format in Coatema´s own tv studio this year. It was great to see that the premiere went so well.

 

Read more ...

LinkedIn-Live-Interview "Coating Tech Talk"

Now available as video on You Tube. A very interesting and valuable feature from our Vice President Thomas Kolbusch as a guest speaker with Ilkay Özkisaoglu from IMBEO – Passionate B2B Partnerships – about technical textiles, packagings and the composite industry. None of your windbreakers, your diary milk or car seats would be perfectly protected without coatings form Acrylic to PVC and beyond.

If you are in the tecnical textile, packaging and also from the composite industry you don´t have to miss this talk where we announce also our 19th international coating symposium in digital format. 

Don´t miss our digital event and register till November 2th, 2020 here:

 

Virtual workshop "Applications and Industrialisation of Functional Polymer Films, Paper and Membranes"

Logo FlexFunction2Sustain

On 2020, 21th of October Applications and Industrialisation of Functional Polymer Films, Paper and Membranes as part of the FlexFunction2Sustain European Horizon2020 Project will take place. Coatema is proud partner of the project which will lay the groundwork for an Open Innovation Test Bed (OITB) for sustainable intelligent packaging.

Register now for this workshop on https://flexfunction2sustain.eu/flexfunction2sustain-workshop/

LinkedIn-Live-Interview "Coating Tech Talk" by Ilkay Özkisaoglu

Coatema 2020 TechTalk II

 

The season for virtual summits and symposiums is in full swing. Ilkay Özkisaoglu invite you to the Coating Tech Talk live on his LinkedIn channel this week.

https://www.linkedin.com/posts/ilkayoezkisaoglu_linkedinlive-coating-packaging-activity-6717880339450081280-5nIH

Thomas Kolbusch will be his guest and they have a conversation about coating technologies.
None of your windbreakers, your diary milk or car seats would be perfectly protected without coatings from Acrylic to PVC and beyond.

Read more ...

19th international Coating Symposium

Coatema 2020 Symposium Teaser en03

19th international Coating Symposium 2020 by Coatema

The international Coating Symposium has been a fixed event in the coating and printing industry since the year 2000. We are pleased to invite you to the 19th international Coating Symposium on November 4th, 2020.

Due to the current situation, the 19th international Coating Symposium is being converted to a virtual format. Detailed information and final agenda will follow by the end of September.
Speakers from industry, institutes and R&D will present the latest developments around Coating, Printing and Laminating and we will show trials in our R&D centre on site.

Address: Roseller Strasse 4, 41539 Dormagen

Please let us know if you are interested in attending this event by filling out the attached application form no later than October 23th, 2020.

We are looking forward to see you in November,
your Coatema Team

 

Invitation

Application form

More information

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

New Managing Director at Coatema

Dr. Markus Deimel has been appointed as further Managing Director at Coatema Coating Machinery GmbH since August 1, 2020 and will be responsible for the management of the company together with Dr. Tarik Vardag, Managing Director of the ATH Group. Although Dr. Andreas Giessmann and Detlev Dieke will leave the company as Managing Directors end of the year as planned, they will continue to work as consultants in the ATH group thereafter.

The 45-year-old mechanical engineer Dr. Deimel has extensive experience in mechanical and plant engineering. After positions at ThyssenKrupp and the Körber Group, he was most recently Managing Director at Vollert Anlagenbau GmbH.

Dr. Deimel has broad expertise in business management with focus on engineering and project management as well as on procurement, production and after-sales services.

„I look forward to apply my experiences to Coatema to shape actively the future of this innovative technology company together with the employees.“

 

Coatema 2020 Dr Vardag Dr Deimel 850px

Managing Directors of Coatema (from the left): Dr. Tarik Vardag, Dr. Markus Deimel

Let’s rethink plastic!

Logo FlexFunction2Sustain   Europafahne mit agreement no 862156

FlexFunction2Sustain – Open Innovation Test Bed launched on 1st April to boost innovations for sustainable plastic and paper products to reach the market faster.

On April 1st, the EU-funded initiative FlexFunction2Sustain was launched. The project, financed by the European Union’s Horizon 2020 research and innovation programme, will support Plastics and Paper Processing Industry in overcoming environmental challenges while entering the digital age. 19 European partners unify their competencies, practical and business development expertise and technical infrastructure to provide a wide access to innovative solutions through a sustainable open innovation ecosystem. This Open Innovation Test Bed for nano-functionalized plastic and paper surfaces and membranes will support innovative SMEs and industries by drastically reducing the time-to-market for novel concepts, ideas and products.

Read more ...

Coatema offers digital trials

header 1000x360px en

Dear Valued Customers and Suppliers,
 
Coatema is committed to the safety and well-being of our employees, customers, and suppliers during the evolving
COVID-19 pandemic.
We’re working hard to prevent the spread of the disease while maintaining key operations to meet the critical needs of our customers. 

Read more ...

Information Coronavirus

Dear Business Partner,

since the outbreak of the coronavirus Covid-19, we observe the situation every day very carefully.

In February, we have installed a Task Force Team to evaluate the current situation, to protect our employees, to reduce the impact for our customers and to implement preventive measures.

Read more ...

„PhotonFlex“ – organic solar cells manufactured in a roll to roll process

photonflex efre nrw de EFRE 0800069 eelicon eu

 

„PhotonFlex“ – organic solar cells manufactured in a roll to roll process

The project „PhotonFlex“ focused on the investigation and development of an entire roll to roll (R2R) process chain for the fabrication of flexible organic photovoltaic (OPV).

In close collaboration, the Fraunhofer Institute for Laser Technology (ILT), the Chair of Applied Laser Technology at the Ruhr University Bochum (LAT), Ortmann Digitaltechnik GmbH, LIMO GmbH and Coatema Coating Machinery GmbH developed innovative technologies for integrated coating, patterning and encapsulation processes for OPV production.

Read more ...

CES 2020 in Las Vegas was very successful

Coatema 2020 CES02

On behalf of our international team we would like to thank you for visiting the Coatema Coating Machinery exhibit at CES 2020 last week at the OE-A Printed Electronics pavilion in the Sands Exhibition Center in Las Vegas.

Coatema is a leading provider of equipment and R&D services, for coating, printing and laminating sheets and rolls of most materials.

Our CES 2020 exhibit included overviews and samples of conductive printing and coating applications for flexible printed electronics, battery and solar devices.  Our most popular display featured unique light altering UV nanoimprinted structures on flexible and ridged surfaces for exciting new packaging, display technologies and automotive interior design.

Coatema offers equipment solutions for the most demanding applications in coating, printing and laminating with a full range of systems, from table-top lab tools to pilot lines and finally production scale factory equipment.

Read more ...

Technical article on the subject of „The world's smallest composite material“

With the collaboration of our employee Thomas Exlager, the technical article: "The smallest composite material in the world", appeared in Coating International issue 11/2019.

20191219 Coating International Fachartikel Der kleinste Verbundwerkstoff der Welt

Technical article as PDF "The world's smallest composite" (PDF Artical in german language)

Article in the Neuss-Grevenbroicher Zeitung

Coatema presents pilot production

Coating company from Roseller Strasse informed guests from Europe and NRW.

2019 Coatema Artikel NGZ

Read more in NGZ June 4, 2019 (PDF Artical in german language)

Read more in NGZ Online from 04.06.2019 (PDF Artical in german language)

Articel in the NMWP-Magazin

Coatema's versatile technical center for coating, printing and laminating

On 1,200 m², Coatema offers its customers and project partners a comprehensive infrastructure and extensive process know-how for coating, printing and laminating.

2019 NMWP Magazin Artikel01 2019

Read more about the article in the NMWP magazine, 01.2019 issue (PDF Artical in german language)

18th international Coating Symposium

2019 Coatema 18.Symposium Teaser en

18th international Coating Symposium 2019 by Coatema

The International Coating Symposium has been a fixed event in the coating and printing industry since the year 2000. We are pleased to invite you to the 18th international Coating Symposium on November 12th and 13th, 2019.
The program will follow.

Address: Roseller Strasse 4, 41539 Dormagen

Please let us know if you are interested in attending this event until October 31st, 2019 by filling in the application form and return. Application form link:

Einladung  Invitation

Anmeldung  Application form

Programm  Program

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EPPN Workshop at Coatema 21 – 22 May 2019

2019 Coatema Ausschnitt Technikum

NMWP-Topic evening, EPPN Workshop and live demonstrations

The EPPN workshop is addressed at and gives the opportunity for exchange between pilot facilities. In a match-making poster session and several short talks, pilot facilities present themselves and their road to sustainability. It takes place at Coatema Coating Machinery GmbH which operates successfully its open R&D centre for coating, printing and laminating on a commercial basis since several decades. As illustrated with its modular Click&Coat® pilot line below, partners from industry and academia have the opportunity to test and evaluate their novel materials, processes and products on existing pilot lines and production equipment at Coatema to gain first production experience, samples for evaluation or test small pilot series production. This enables an early market entry and secures economic success.

Read more ...

New OPTIMA Alliance COMEDCO Wins ICE Award 2019

 

Winning an award and making many new contacts: after the conclusion of ICE Europe in Munich.
Optima Life Science looks back on a successful trade fair. The films with active pharmaceutical ingredients and the matching manufacturing and packaging technology of the COMEDCO alliance convinced the industry experts. The COMEDCO total solution for transdermal patches (TDS) and oral dispersible films (ODF) received the ICE Award for „Innovative Specialty Films", which was awarded by trade fair visitors via online voting. The award ceremony took place on March 12 at ICE Europe in Munich.

 

Read more ...

Emerging Technologies 2019 Shanghai

Coatema will be exhibiting at the FLEXIBLE HYBRID ELECTRONICS WORLD 2019 from April 16 – 17, 2019 in Shanghai, China 

Since the great success of Emerging Technologies 2018, DEMAND-LED and global authoritative co-organizers are inviting all experts, decision makers and marketers all over the world to “Emerging Technologies 2019” which will be held on April 16 – 17, 2019 in Shanghai, China.

The conference is composed of four themes: “4th Flexible Hybrid Electronics World”, “8th China International OLEDs Summit”, “4th China International Quantum Dots Summit”, and “2nd HMI World”.

Covered the global and Chinese development of technology & market trend, new breakthroughs of production process & equipment, solutions of latest materials and case studies & solutions of applications (Smart Manufacturing, Healthcare, Automobiles and Aircrafts, Wearable Devices, Smart Fabrics, TV, AR & VR, Smart Phone, Lighting, IoT, Energy Harvesting & Storage, Bio Medical, Cosmetics etc.)

Visit us at Booth E5

Venue: No. 400, Fanyu Road, Shanghai, China

Read more here: Emerging Technologies 2019 China

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

COPHEX 2019 Seoul, Korea

Coatema will be exhibiting at the COPHEX 2019 in Seoul, Korea from April 16 – 19, 2019

The Cophex in Goyang is one of the largest trade shows for the cosmetics and pharmaceutical industries in Korea. It is held jointly with other trade fairs from related industries to take advantage of synergy effects. This exhibition is communication and information platform in the industry and offers the exhibiting companies the opportunity to present to an audience of experts here. Visitors can find in depth and comprehensive information here about the latest developments, trends, products and services in various fields.

Visit us at Booth 2E802

Venue: Hall 2, KINTEX 1
(Korea International Exhibition Center 1), Korea

Read more here: COPHEX 2019 Korea

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

SID Display Week San Jose, USA

Coatema will be exhibiting at the SID event in San Jose, USA  14 – 16 May, 2019

At the SID event Coatema is showing a printed OLED, a nanoimprinted optical sturcture on a flexible substrate and samples of low viscosity inks coated with a slot die.

 

Visit us at joint pavilion "Made in Germany" –  German pavilion, Booth 1413

Venue: San Jose McEnery Convention Center, San Jose, California, USA 

Read more here: SID Dipslay Week 2019

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

TECHTEXTIL 2019 in Frankfurt

Coatema will be exhibiting at Techtextil 2019 in Frankfurt, Germany 14 – 17 May, 2019

Techtextil provides an overview of the latest developments in the industry. An extensive supporting programme provides additional technical inspiration and opportunities for discussions. From 14 to 17 May 2019, international exhibitors will be presenting the entire spectrum of technical textiles, functional apparel textiles and textile technologies at Techtextil in Frankfurt am Main. Texprocess, the leading trade fair for the garment manufacturing and textile processing industry, will take place at the same time as Techtextil.

Visit us at our hall 3.0 / G18Venue: Frankfurt, Friedrich-Ebert-Anlage 1, Germany

Read more here: Techtextil 2019 Frankfurt

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

IDTechEx Show Berlin

Coatema will be exhibiting at IDTechEx Show Berlin April 10 – 11, 2019

The latest emerging technologies at one event. Eight co-located conferences and a single exhibition will cover 3D Printing, Electric Vehicles, Energy Storage, Graphene, Internet of Things, Printed Electronics, Sensors & Wearable Technology.

Visit us at our booth L18.
Venue: Berlin, Estrel Convention Center, Germany

Read more here: IDTechEx Show 2019 Berlin

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

LOPEC 2019

LOPEC 2019

Coatema will be exhibiting at LOPEC 20 – 21 March, 2019

LOPEC is the leading trade fair for printed electronics. It encompasses every facet of this emerging technology, covering the entire value chain – from research and development to specific applications – as well as facilitates those essential business contacts. LOPEC (Large-area, Organic & Printed Electronics Convention) is the leading trade fair and the most important conference for the printed electronics industry. The event takes place at Messe München convention center. It is the leading global platform in the industry and provides support in every aspect of the industry, from application to research. It connects, inspires and puts ideas into practice. For today and tomorrow. This is the place where printed electronics come to life.

Visit us: Booth 304 / Hall B0

Venue: Munich Trade Fair Centre, Messegelände Eingang West (West Entrance), Am Messesee / ICM Building, 81829 Munich

Read more here: https://www.lopec.com/index.html

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

NRW delegation visit to Japan

Coatemas Vice President Thomas Kolbusch will be participating the NRW delegation´s visit to the Fuel Cell Expo / Battery Expo in Japan 24th February – 3rd March, 2019. Further details and press release coming up soon.

https://www.energieagentur.nrw/international/unternehmerreise_japan_zur_fuel_cell_expo_battery_expo

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

ICE EUROPE 2019

Coatema will be exhibiting at ICE Europe 12 – 14 March, 2019 

The 11th ICE Europe, the World´s Leading Exhibition for Paper, Film and Foil Converting, will take place from 12 – 14 March 2019 in halls A5 and A6 of the Munich Trade Fair Centre in Munich, Germany.

Visit us: Booth 660 / Hall A6

Venue: Munich Trade Fair Centre, Messegelände, Eingang Ost (East Entrance), Am Messeturm 4, 81829 Munich

Read more at:  ICE EUROPE 2019

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

JEC World 2019 in Paris

Coatema will be exhibiting at JEC World in Paris March 12 – 14, 2019. 

Be part of the leading international composite show. JEC World creates an exclusive program featuring the most respected decision makers in the global composite industry. 

Through visionary conversations, concrete case studies and workshops, participants will benefit from their peers' insightful business tips to grow their international business. 

Visit us at our booth!

Address: Paris Nord, Villepinte – Hall 5/Booth No. F56 NRW Joint-Pavilion

Read more at: https://www.jec-world.events/

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

8th NRW Nano Conference

The 8th NRW Nano Conference presented innovations in materials for a wide range of applications. Two days dedicated to nanotechnology and innovative new materials - Germany's most important nanotechnology meeting provided insights into current trends and developments for the eighth time.

Read more in the issue of NMWP from 01.2019

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

CES 2019 Las Vegas, USA Daily Newsfeed

2019 Coatema Twitter Feed

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 
 
 
 

CES 2019 Las Vegas, USA Newsfeed

Visit us at CES 2019 Tech West – Sands Expo, Level 2, Halls A-D, January 08 – 11, 2019

Building our booth at the OE-A Joint Pavilion Booth No. 40721, Las Vegas USA

2019 Coatema auf der CES

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Newsfeed 8th Nanoconference 2018 in Dortmund, Germany

Follow us on twitter:

https://twitter.com/coatema

and/or LinkedIn

https://www.linkedin.com/feed/

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

CES 2019 Las Vegas, USA

Coatema will be exhibiting at the CES 2019 in Las Vegas, USA.

CES is the world's gathering place for all those who thrive on the business of consumer technologies. It has served as the proving ground for innovators and breakthrough technologies for 50 years — the global stage where next-generation innovations are introduced to the marketplace.

Owned and produced by the Consumer Technology Association (CTA), it attracts the world's business leaders and pioneering thinkers.

Visit us for a consultation. We will be at CES Consumer Technology Association – OE-A Joint Pavilion Booth No. 40721

Venue information: https://cdn.ces.tech/ces/media/pdfs/ces-2019-svm-round-5-final.pdf

Read more at: https://www.ces.tech/international.aspx

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

IDTechEx Show Santa Clara

Coatema will be exhibiting at the IDTechEx Show! in Santa Clara, CA USA November 14 – 15, 2018

The IDTechEx Show! presents the latest emerging technologies at one event, with eight concurrent conferences and a single exhibition covering 3D Printing, Electric Vehicles, Energy Storage, Graphene, Internet of Things, Printed Electronics, Sensors and Wearable Technology.

Visit us at our booth for a consultation

Address: Santa Clara Convention Center, CA, US – Booth No. A10

Read more at: https://www.idtechex.com/usa2018/show/en/contact

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Composite Europe Stuttgart

Coatema will be exhibiting at the COMPOSITE EUROPE in Stuttgart, Germany November 6 – 8, 2018.

Composite Europe is established as an international business platform for the composite industry. New modules should facilitat the matchmaking and generate new business for both, exhibitors and visitors. Over 9,000 trade visitors, including 40% from abroad from 63 countries. As the international industry meeting point in Europe’s biggest composites market, COMPOSITES EUROPE combines tried and tested solutions and efficient innovations. The trade fair reflects the variety of goods and services and the innovative strength of the entire industry. Major topics at the fair are state-of-the-art production and processing technologies focussing, among others, on concepts for lightweight construction and automotive applications.

Visit us at booth no. 49, Hall 9 for a consultation.

Website: https://www.composites-europe.com/en/

Address: Messe Stuttgart, Messepiazza 1, 70629 Stuttgart, Germany

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

COMPAMED 2018

COMPAMED is the trade fair for suppliers and manufacturers of medical technologies in Düsseldorf / Germany from 12 - 15 November 2018. This year Coatema will be presenting its new alliance COMEDCO at IVAM Joint-Pavilion in Hall 08A, Booth No. F19. Coating and Converting combined:

Reaching your objective fast and safe with a new alliance: COMEDCO. The new alliance assists pharmaceutical companies with their start into the manufacturing and packaging process of transdermal dressings and oral dispersible films. The technology leaders Coatema Coating Machinery GmbH and OPTIMA life science GmbH are behind COMEDCO with their expertise in converting and coating with pharmaceutical medicines.

Today’s technology offers new methods to administer medication. Pills and syringes will remain; however, there are many reasons to expand how to administer medications. An example is older people in need of care who have difficulty swallowing and where pills might not safely reach the intended “target”. Or illnesses, which may require frequent shots. Cases like these require alternative solutions that are still effective but more convenient for the patient.

Read more ...

KROENERT and Coatema under one umbrella company

+++++ PRESS RELEASE +++++

KROENERT and Coatema under one umbrella company

Hamburg/Dormagen, 29 August 2018 – Hamburg-based ATH Altonaer-Technologie-Holding GmbH – owner of KROENERT GmbH & Co KG – and Coatema Coating Machinery GmbH, have announced that they have signed an agreement under which ATH will take over all shares of Coatema.

KROENERT and Coatema are manufacturers of machinery and systems in the coating and converting industry and global leaders in their respective market sectors. Merging the companies under the umbrella of ATH will create a group with a comprehensive product portfolio of coating applications and a high degree of innovative power.

Both companies and brands will remain independent and continue to operate from their respective headquarters as before. Detlev Dieke and Dr. Andreas Giessmann will also retain their positions as managing directors of Coatema.

Read more ...

Coatema at INDTECH2018 Vienna, Austria

Coatema will be exhibiting at the INDTECH2018, the European "INDustrial TECHnologies 2018 – innovative industries for smart growth" in Vienna from 29 – 31 October, 2018.

Matchmaking, talks with experts and academics, exhibitions = Innovative industries for smart growth. 1000 expected participants, 80 speakers from more than 30 countries in Europe and across the globe, 20 talks in 3 parallel sessions, interactive discussions in world cafés and fish-bowls, matchmaking events, site visits to 5 leading Austrian companies, exhibition with over 20 leading international organisations, 10 thematic workshops on 29 October.

For promotional material click here:

Flyer Announcement INDTECH2018 Vienna, Austria

Presentation INDTECH2018 Vienna, Austria

Programme INDTECH2018 Vienna, Austria

Website: https://www.indtech2018.eu/

 

Address: Messe Wien Exhibition & Congress Center, Messeplatz 1, Austria

 

For more information on this event please contact:
Marketing Executive Tanja Simone
Phone: +49 (0) 2133 / 97 84 - 121

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Visit by Minister of Economy of North-Rhine Westfalia Andreas Pinkwart at Coatema

+++++ PRESS RELEASE +++++

Visit by Minister of Economy of North-Rhine Westfalia Andreas Pinkwart

Dormagen, 20 Juli 2018 – Global acting German Company Coatema has 48 employees and is very successful for over 40 years. The family owned business in second generation has experience in coating, laminating and printing with its core business in custom made machinery and machinery from Lab to Fab. New Technologies and cooperations with other middle-class companies have made Coatema to one of the market leaders world wide.

The focus is on high tech markets, world class full-service and a versatile R&D centre for coating, printing and laminating. This enables Coatema to offer complete Lab to Fab technologies.

In March 2018, Coatema has been honored by the Network Future through Innovation. As a finalist in cooperation with the Fraunhofer ISC. The project honored is about a cost efficient electrochromic film for smart windows.

Minister Pinkwart was very impressed of the innovation made by Coatema.

During his summer journey through North-Rhine-Westfalia visiting companies, he decided to visit also Coatema and to get to know more about this innovative company. The company gave him an overwiev about their strategy in innovation and current status of R&D projects. A tour through the Coatemas R&D Center was guided by the Coatema management team. Pinkwart said: „Innovation through cooperation is the competence of Coatema. I was excited about the latest idea of an „open Fab“. This is a platform where different cross-sectional technologies get together and interchange. It shall be used by all middle-class companies and would improve business conditions in general in the state of North-Rhine-Westfalia.”

COMEDCO

+++++ PRESS RELEASE +++++

COMEDCO – the complete solution for transdermal dressings and oral dispersible films

A new alliance: Coating and converting combined

Reaching your objective fast and safe with a new alliance: COMEDCO. The new alliance assists pharmaceutical companies with their start into the manufacturing and packaging process of transdermal dressings and oral dispersible films. The technology leaders Coatema Coating Machinery GmbH and OPTIMA life science GmbH are behind COMEDCO with their expertise in converting and coating with pharmaceutical medicines.

Today’s technology offers new methods to administer medication. Pills and syringes will remain; however, there are many reasons to expand how to administer medications. An example is older people in need of care who have difficulty swallowing and where pills might not safely reach the intended “target”. Or illnesses, which may require frequent shots. Cases like these require alternative solutions that are still effective but more convenient for the patient.

It also makes sense to transport the substances as close as possible directly to the affected area during administering. A lower drug concentration and less stress to the gastrointestinal tract are additional advantages to choose transdermal dressings or oral dispersible films.

A higher demand in oral dispersible film (ODF) and transdermal dressings (TDS – transdermal systems) is already apparent for the machine manufacturing industry, especially in the Asian and U.S. market.

Read more ...

Find us on Instagramm
Virtueller Rundgang Technikum
Request a Quote
YouTube